|
Measures when the device driver attached to the GPS manufacturer cannot be installed because it does not have a digital signature. USB serial driver installation procedure Windows 10 Connect GPS to USB. Start "Device Manager" and execute "Action"-> "Scan for hardware changes" Confirm that "GPS Receiver" is displayed in "Other devices". Right-click "GPS Receiver" and click "Update driver", Click "Search automatically for drivers", Click "Search for updated driver on Windows Update". "Windows Update" will be started, so click the "Check for updates" button. Click "View optional updates" and then click "Driver updates" Check the desired driver from the displayed list. Click the "Download and install" button to install. Windows 11 Connect GPS to USB. Start "Device Manager" and execute "Action"-> "Scan for hardware changes" Confirm that "GPS Receiver" is displayed in "Other devices". Right-click "GPS Receiver" and click "Update driver", Click "Search automatically for drivers", Click "Search for updated driver on Windows Update". "Windows Update" will be started, so click the "Check for updates" button. Click "Advanced options" and then click "Optional updates" in the "Additinal options" field. Click "Driver updates (n)" and check the desired driver from the displayed list. Click the "Download & install" button of "Install selected updates (n)" to install. Procedure to change u-blox GPS registered as a sensor device to serial connection. Windows 10,11 Start "Device Manager", right-click "u-blox n GPS Location Sensor" in the "Sensors" section, and select "Update driver". Click "Brows my computer for drivers" and click "Let me pick from a list of avalable drivers on my computer". Click "USB Serial Device" and then click the "Next" button. Click "Close" and confirm that "USB Serial device (COMn)" is added to "Ports (COM & LPT)". |